Category: Solar Energy

I am not going to say that geothermal or solar energy is infinite in scale, but the heat sources within the Earth are immense, and a well-managed program has the potential to be operational for many decades, if not centuries. The Second Law is used extensively to assess the performance and guide the design of various types of geothermal energy conversion systems. The case studies included in the third part of the book are chosen from plants around the world, and increase the reader’s understanding of the elements involved in gaining access to, and making use of, this important renewable energy resource. The United States is a world leader in the production of geothermal energy. Geothermal Production and Development by Leslie Blodgett, (9/25/08), at the present time, it is already producing over 16,000 gigawatt-hours of solar energy, almost half of this on Federal lands.

If we could extract all the geothermal energy that exists underneath the United States to a depth of two miles, it would supply America’s power demands (at the current rate of usage) for the next 30,000 years. Getting at all that energy is not feasible?there are technological and economic impediments of earth energy, but drawing on just 5 percent of the geothermal wealth would generate enough electricity to meet the needs of 260 million Americans. Calpine Corporation now owns 19 of the 21 plants in The Geysers and is currently the United States’ largest producer of geothermal energy. Since the activities of one geothermal plant affects those nearby, the consolidation plant ownership at The Geysers has been beneficial because the plants operate cooperatively instead of in their own short-term interest. Overall, I’m a buyer of geothermal energy and I think it will play a big role in the world’s transformation to renewable energy.

There are many advantages of geothermal energy. It can be extracted without burning a fossil fuel such as coal, gas, or oil. Tapping a lot of geothermal energy will make the earth’s surface hotter (not cooler), making global warming worse without wind energy. It amounts to moving heat from the interior (which gets a tiny bit cooler) to the surface. The three-year exploration and resource research project focused on West Texas, identifying and assessing potential sites for converting depleted deep gas wells and fields into geothermal energy wells to generate renewable electrical power. This UTPB map shows five areas in Texas with either deep sedimentary basins or areas of high temperatures sufficiently close to the Earth’s surface for possible use in electrical energy production.

With energy sources depleting at a rate faster than they are being built, it is only wise that we use the abundant energy available for free – the solar energy. Apart from the easy availability, solar energy helps control environmental pollution. Most of us shy away from installing solar power solutions at home thinking them to be expensive and cumbersome. You will, however, be surprised to know how easy it is to employ these power solutions. Moreover, these will help cut down your power bills. Finally, you will be delighted to know tat you are doing your bit to save power for the future generations.

This article will explore the various solar power options available for home use.

Solar cooker: A solar cooker is a cooking utensil that uses absolutely no fuel for cooking. You can cook food for up to five people in the small box. If you are thinking that using a solar cooker will reduce your chances of spreading up a varied platter on the dining table, you will be surprised to know that you can not only boil food items in the cooker but also roast and bake! The only limitation with the solar cooker is the time it takes to cook. However, given the free source of energy it uses, this is a great option for cutting down those sky-rocketing bills and saving some power.

Solar home lighting: A solar home lighting system converts solar energy into electrical energy for your home. This is done via cells that are charged with solar energy. So, in the night, if you wonder how the lights are on in the house, it is because of the solar energy stored in the solar cells. You can install the solar home lighting system in your house and not worry about the electricity bills anymore.

Solar heating system: Installing a solar heating system in your home helps cutting down your electricity bill along with saving the world’s quickly-exhausting power. If you are worried that a solar heating system will turn your sweet home into a gadget house or that it will be an expensive investment, your concerns are misplaced. Companies providing solar power solutions for homes make it a point to install aesthetically-pleasing heating systems in your house. As per as expenditure is concerned, investing in a solar heating system is wise because you get a return on your investment within 3-4 years, giving you absolutely free service after that. Imagine, turning off your traditional heating system in the summer and using it only 20% in the spring and fall. Never pay for heating your hot water or your house again.

RGJ International SA can provide you with all your solar power needs. Our products are all high quality, “Made in the EU”, carry world-wide guarantees and installed by professionals.

Please visit us for renewable energy or for solar panels. For the useful information about how to install suspended ceiling - visit this blog.

More people are becoming interested in the advantages of Home Solar Power Systems. Using one of these systems is the only way to gain your independence from local utilities which supply electrical energy for your home. By installing solar panels on your house and the generator needed to convert sunlight into usable energy, you’ll never have to worry about power outages or the potential increased costs of powering your house.

Home Solar Power Systems

Each home Home Solar Energy Systems includes solar photovoltaic (PV) panels, an interactive network inverter, the roof assembly and a wiring system. All home solar energy systems require a simple but complete installation, and some homeowners may require assistance with paperwork in order to qualify for a possible government financial incentive.

Home Solar Power Systems are easy and inexpensive to install in your home. There are numerous do-it-yourself kits available, or you can hire a contractor to come and install the system for you. Whatever your choice, it is clear that installing a home solar energy system is a great way to do your part to help keep the earth green.

Typically, if you do the installation yourself, you will need the help of some friends; because the panels can be a bit heavy and unwieldy. Also, working alone on a roof with big panels is not a very safe practice.

Home Solar Power Systems

Before you start installing your Home Solar Energy Systems, you must make sure that you have all the tools and equipment needed. As a general rule, your basic handy-man tool kit will suffice for installing the panels on the roof of your house. However, if you plan to install solar panels in a place away from your home, you may need to rent equipment in order to bury the cables. Also, you will need to ensure that you have a safe place to house the generator for your Home Solar Energy Systems.

This article will describe how solar energy is created and cover some of its basic principles.

Solar energy consists of the light and heat emitted by the sun, in the form of electromagnetic radiation.

With today’s technology, we are able to capture this radiation and turn it into usable forms of solar energy - such as heating or electricity.

Although one could go into technical dissertations on the subject of electromagnetic radiation, how it is converted into solar energy, and the exact qualities of its electromagnetic rays, this is not something the average person needs or wants to know.

But in order to benefit the most from the use of solar power, there are a few facts you should know. Knowing these facts can assist you to make a sound decisions, when looking at the use of solar power as a clean energy source for your home, RV, or whatever the case may be.

- Available Solar Resource

The technical feasibility and economical viability of using solar energy depends on the amount of available sunlight (solar radiation) in the area where you intend to place solar heaters or solar panels.

This is sometimes referred to as the available solar resource.

Every part of Earth is provided with sunlight during at least one part of the year. (I say “part of the year” as the north and south polar caps are each in total darkness for a few months of the year.) The amount of sunlight available is one factor to take into account when considering using solar energy.

There are a few other factors, however, which need to be looked at when determining the viability of solar energy in any given location. These are as follows:

* Geographic location

* Time of day

* Season

* Local landscape

* Local weather

Because the Earth is round, the sun hits its surface at different angles, at different locations on the globe. This ranges from 0� (just above the horizon - a good example of this is the north pole during the winter) to 90� (directly overhead, at and near the equator).

When the sun’s rays are vertical (directly overhead), the Earth’s surface gets a maximum of solar energy. The more slanted the sun’s rays are, the longer they have to travel through Earth’s atmosphere before reaching the surface (becoming more scattered and diffuse as they go along).

The more scattered and diffuse the sun rays are, the less concentrated the solar energy is. Because the Earth is round, the polar regions never get direct sunlight, and they receive no sun at all during their respective winter months.

The Earth travels around the sun in an elliptical orbit. Because of its elliptical path, the northern hemisphere of the Earth is closer to the sun during one half of the year, and the southern hemisphere is closer during the other half of the year.

When one part of the Earth is closer to the sun, it receives more concentrated solar energy. This is the time of year that is referred to as “summer.”

But regardless of summer or winter, the 23.5� tilt of the Earth’s axis plays a larger role in determining the amount of sunlight striking Earth at a particular location. The tilting of the earth results in longer days in the northern hemisphere during one half the year, and longer days in the southern hemisphere during the other half of the year.

Areas such as the United States and Europe receive more solar energy between May and September - not only because days are longer, but also because the sun is nearly overhead during this season. The sun’s rays are far more slanted during the shorter days of the winter months. Cities such as Denver, Colorado, receive nearly three times more solar energy in June than they do in December.

- Diffuse and Direct Sunlight

As sunlight passes through Earth’s atmosphere, some of it is absorbed, scattered, and reflected.

The following is a general list of materials that cause the sunlight to be diffused:

* Air Molecules

* Water vapor

* Clouds

* Dust

* Pollutants

Sunlight affected in this way is referred to as diffuse solar radiation or diffuse sunlight.

Sunlight that reaches the Earth’s surface without being diffused is called direct beam solar radiation or direct sunlight.

The sum total of all diffuse and direct solar radiation in a given location is called global solar radiation. It is the total amount of sunlight hitting the Earth at any specific spot, both direct and diffuse combined.

Pollution and other atmospheric conditions (such as weather patterns) can reduce direct sunlight by 10% on clear dry days. They can reduce direct beam radiation by 100% on thick, cloudy days.

Note that the absence of direct sunlight does not imply total darkness, as some diffuse light will still get through.

- Measuring Sunlight and Solar Energy

Scientists measure the amount of sunlight available in specific locations during the different times of year.

They are then able to estimate the amount of sunlight which falls on similar regions at the same latitude with similar climates and conditions.

Measurements of solar energy are normally expressed as “total radiation on a horizontal surface”, or as “total amount of radiation on a surface tracking the sun”.

In this last case, the assumption is that one is using a solar panel that automatically tracks the sun.

In other words, the solar panel would be mounted on a tracking device so that the panel would remain at right angles to the sun throughout the day.

This system is primarily used for industrial setups, when it is used at all.

- Solar Energy Measurements

Radiation data (the amount of solar energy available at a given location) for solar electric (photovoltaic) systems is often represented as kilowatt-hours per square meter (kWh/m2). Direct estimates of solar energy may be expressed as watts per square meter (W/m2).

Radiation data for solar water heating and space heating systems is usually represented in British thermal units per square foot (Btu/ft2).

————————

Anna supports of clean living and the use of renewable energy in order to combat pollution and Global Warming, as well as the humanitarian and economic consequences of dependency on fossil fuels.

For more information on solar energy, visit Anna’s blogs, Solar Power and Alternative Energy.

You can also find a wide variety of solar power equipment, solar battery chargers, portable solar power, solar water heating, solar powered weather stations, solar fountains, solar lights, home solar panels, and more, at her Solar Power Store.

This article will describe how solar energy is created and cover some of its basic principles.

Solar energy consists of the light and heat emitted by the sun, in the form of electromagnetic radiation.

With today’s technology, we are able to capture this radiation and turn it into usable forms of solar energy - such as heating or electricity.

Although one could go into technical dissertations on the subject of electromagnetic radiation, how it is converted into solar energy, and the exact qualities of its electromagnetic rays, this is not something the average person needs or wants to know.

But in order to benefit the most from the use of solar power, there are a few facts you should know. Knowing these facts can assist you to make a sound decisions, when looking at the use of solar power as a clean energy source for your home, RV, or whatever the case may be.

- Available Solar Resource

The technical feasibility and economical viability of using solar energy depends on the amount of available sunlight (solar radiation) in the area where you intend to place solar heaters or solar panels.

This is sometimes referred to as the available solar resource.

Every part of Earth is provided with sunlight during at least one part of the year. (I say “part of the year” as the north and south polar caps are each in total darkness for a few months of the year.) The amount of sunlight available is one factor to take into account when considering using solar energy.

There are a few other factors, however, which need to be looked at when determining the viability of solar energy in any given location. These are as follows:

* Geographic location

* Time of day

* Season

* Local landscape

* Local weather

Because the Earth is round, the sun hits its surface at different angles, at different locations on the globe. This ranges from 0� (just above the horizon - a good example of this is the north pole during the winter) to 90� (directly overhead, at and near the equator).

When the sun’s rays are vertical (directly overhead), the Earth’s surface gets a maximum of solar energy. The more slanted the sun’s rays are, the longer they have to travel through Earth’s atmosphere before reaching the surface (becoming more scattered and diffuse as they go along).

The more scattered and diffuse the sun rays are, the less concentrated the solar energy is. Because the Earth is round, the polar regions never get direct sunlight, and they receive no sun at all during their respective winter months.

The Earth travels around the sun in an elliptical orbit. Because of its elliptical path, the northern hemisphere of the Earth is closer to the sun during one half of the year, and the southern hemisphere is closer during the other half of the year.

When one part of the Earth is closer to the sun, it receives more concentrated solar energy. This is the time of year that is referred to as “summer.”

But regardless of summer or winter, the 23.5� tilt of the Earth’s axis plays a larger role in determining the amount of sunlight striking Earth at a particular location. The tilting of the earth results in longer days in the northern hemisphere during one half the year, and longer days in the southern hemisphere during the other half of the year.

Areas such as the United States and Europe receive more solar energy between May and September - not only because days are longer, but also because the sun is nearly overhead during this season. The sun’s rays are far more slanted during the shorter days of the winter months. Cities such as Denver, Colorado, receive nearly three times more solar energy in June than they do in December.

- Diffuse and Direct Sunlight

As sunlight passes through Earth’s atmosphere, some of it is absorbed, scattered, and reflected.

The following is a general list of materials that cause the sunlight to be diffused:

* Air Molecules

* Water vapor

* Clouds

* Dust

* Pollutants

Sunlight affected in this way is referred to as diffuse solar radiation or diffuse sunlight.

Sunlight that reaches the Earth’s surface without being diffused is called direct beam solar radiation or direct sunlight.

The sum total of all diffuse and direct solar radiation in a given location is called global solar radiation. It is the total amount of sunlight hitting the Earth at any specific spot, both direct and diffuse combined.

Pollution and other atmospheric conditions (such as weather patterns) can reduce direct sunlight by 10% on clear dry days. They can reduce direct beam radiation by 100% on thick, cloudy days.

Note that the absence of direct sunlight does not imply total darkness, as some diffuse light will still get through.

- Measuring Sunlight and Solar Energy

Scientists measure the amount of sunlight available in specific locations during the different times of year.

They are then able to estimate the amount of sunlight which falls on similar regions at the same latitude with similar climates and conditions.

Measurements of solar energy are normally expressed as “total radiation on a horizontal surface”, or as “total amount of radiation on a surface tracking the sun”.

In this last case, the assumption is that one is using a solar panel that automatically tracks the sun.

In other words, the solar panel would be mounted on a tracking device so that the panel would remain at right angles to the sun throughout the day.

This system is primarily used for industrial setups, when it is used at all.

- Solar Energy Measurements

Radiation data (the amount of solar energy available at a given location) for solar electric (photovoltaic) systems is often represented as kilowatt-hours per square meter (kWh/m2). Direct estimates of solar energy may be expressed as watts per square meter (W/m2).

Radiation data for solar water heating and space heating systems is usually represented in British thermal units per square foot (Btu/ft2).

————————

Anna supports of clean living and the use of renewable energy in order to combat pollution and Global Warming, as well as the humanitarian and economic consequences of dependency on fossil fuels.

For more information on solar energy, visit Anna’s blogs, Solar Energy and Alternative Energy.

You can also find a wide variety of solar power equipment, solar battery chargers, portable solar power, solar water heating, solar powered weather stations, solar fountains, solar lights, home solar panels, and more, at her Solar Power Store.